Multi-tech-systems MT2834ZDX Uživatelský manuál stáhnout pdf (Strana 17)

Chapter 3 – AT Commands, S-Registers, and Results Codes

Multi-Tech Systems, Inc. MT2834ZDX User's Guide 17

Command: %%%AT<CR> Remote Configuration Escape Sequence

Values: n/a

Description: Initiates remote configuration mode while online with remote modem. The remote configuration

escape character (%) is defined in register S13.

Command: +++AT<CR> Escape Code

Values: n/a

Description: Puts modem in command mode (and optionally issues a command) while remaining on line.

Enter +++AT, up to ten command characters (or as defined by S34), and a RETURN. Used mostly

to issue hang-up command: +++ATH<CR>.

Command: <BREAK>AT<CR> Escape Sequence

Values: n/a

Description: Alternate escape method. Puts modem in command mode while remaining on line. Send a

<BREAK> signal followed by AT, up to sixty command characters, and a RETURN. You must set

the modem to %E2 or %E3 before you can use this escape method.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Žádné komentáře

Multi-tech-systems MT2834ZDX Uživatelský manuál Strana 17