Multi-tech-systems ISI551PC Uživatelský manuál stáhnout pdf (Strana 10)

2.1 ISI Card Installation

This chapter provides you with the procedures to

install the Multi-Tech ISI551PC card in your ISA or

EISA bus personal computer.

Hardware installation involves:

1) Opening your PC.

2) Setting card configuration (determining

I/O address DIP-Switch setting and IRQ

jumper setting).

3) Installing the card into the PC.

2.2 Determining Current System

Settings

When you install a serial device into your computer,

the processor must have a means of routing

information to and from the device and the device

must have a means of gaining the processor's

attention. These are called Input/Output (I/O)

addresses and Interrupt Requests (IRQs),

respectively. The ISI551PC card requires eight I/O

addresses and one IRQ value which are not used

by any other device in your system. When selecting

a unique base I/O address, be sure that the other

addresses are also unused. (For example, if you

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Žádné komentáře

Multi-tech-systems ISI551PC Uživatelský manuál Strana 10