Multi-tech-systems MultiModem Uživatelský manuál stáhnout pdf (Strana 21)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375A) 21

PPP

PPP > PPP Configuration

PPP General

PPP Enable/disable PPP. Default is Enable.

Dial-on-Demand: Enable/disable Dial-on-Demand. Default is Enable. If you disable it, the modem will

always stay connected.

Idle Time Out: Set the amount of idle time that will pass before the modem will timeout. Default is

180 seconds.

Connect Time Out: Set the amount of seconds to wait for a connection while in receive mode before

timing out.

Dialing Max Retries: Enter the number of dialing retries allowed. Default is zero, which means an infinite

number is allowed. Range 0 to 100.

Authentication

Authentication Type: Set the authentication protocol type that will negotiate with the remote peer:

pap/chap/pap-chap. Default is pap-chap.

User Name: Enter the User Name with which the remote peer will authenticate. Default is

ipmodule.

Password: Enter the Password with which the remote peer will authenticate. Default is ipmodule.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 41 42

Žádné komentáře

Multi-tech-systems MultiModem Uživatelský manuál Strana 21