Multi-Tech Systems MT128ZLX-ST Uživatelský manuál stáhnout pdf (Strana 135)

MultiMobile MT128ZLX User Guide 4: Windows NT API Usage

128

NOTE: To install, configure, and remove devices in Windows NT, your logon permissions must include the

ability to load and remove device drivers.

NOTE: To complete this procedure, you will need to know several technical details that can be provided by

your ISP or by your network administrator.

1. You will need to know whether or not an encrypted password is needed to access the network

to which you will be connected.

2. If you are connecting to a non-Windows NT server, you will also need to know in advance

whether or not the server requires you to type in login information or to know TCP/IP addresses

before dialing.

3. If applicable, you will need to know the domain name of the network to which you will be

connected.

4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).

5. You will need to know how to configure your port usage (dial-out calls only, receive calls only,

dial-out and receive calls).

To use the Common ISDN Application Interface (CAPI), you must install a CAPI-compliant

telecommunications application, such as the RVS-COM Lite program, which will be used for this

example.

After installing RVS-COM Lite, several new virtual modems become available to configure. The following

example uses the RVS ISDN V.120 modem. Before beginning, be sure that the RVS-COM Center is running

(the icon will appear in the Windows NT Task Bar).

If you would like to use multi-linking with your CAPI connection, first be sure that your ISDN provider

supports a 128kbps MLP option.

The ports you link must first be enabled through RVS-Com. In this example, the RVS ISDN V.120

modems are used.

1. To enable the ports in RVS-Com, open the RVS-Com Comm Center.

2. Click the Services tab. In the Virtual Com Ports section of the window, place a check mark in front of

both ports. Associate each port with a unique COM port number (the two devices must use different COM

ports).

Click Apply, and then OK.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 256 257

Žádné komentáře

Multi-Tech Systems MT128ZLX-ST Uživatelský manuál Strana 135