Multi-Tech Systems ISI5634PCI/4/8 Uživatelský manuál stáhnout pdf (Strana 96)

ISI5634PCI/4/8 User Guide

S5 decimal 032 8 (^H) Sets ASCII code for the backspace

33127 character. Values greater than 32

disable backspace.

S6 seconds 265* 2* Sets time the modem waits after it goes

off-hook before it begins to dial the

telephone number.

S7 seconds 1255* 50* Sets time the modem waits for a carrier

signal before aborting a call. Also sets

wait for silence time for the @ dial

modifier.

S8 seconds 065 2 Sets length of a pause caused by a

comma character in a dialing command.

S9 decimal 0, 1127 37 (%) Sets ASCII code for remote

configuration escape character. S9=0

disables remote configuration.

S10 100 ms 1254 20 Sets how long a carrier signal must be

lost before the modem disconnects.

S11 1 ms 50150* 95* Sets spacing and duration of dialing

tones.

S28 decimal 0, 1255 1 0 disables, 1255 enables V.34

modulation.

S30 1 minute 0, 1255 0 Sets length of time the modem waits

before disconnecting when no data is

sent or received. Value of zero disables

the timer. See also the \T command

S35 decimal 01 0 0 disables, 1 enables the V.25 data calling

tone, which allows remote data/fax/

voice discrimination.

S36 decimal 07 7 Specifies the action to take in the event

of a negotiation failure when error

control is selected. (See S48.)

S37 decimal 019 0 Sets maximum V.34 upstream speed at

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 121 122

Žádné komentáře

Multi-Tech Systems ISI5634PCI/4/8 Uživatelský manuál Strana 96