Multi-tech-systems MT5600ZDX Uživatelský manuál stáhnout pdf (Strana 24)

Model MT5600ZDX

4 Make sure the flow control method you selected in software matches the method

selected in the modem.

4 If you are running under Windows 3.1 and have a 16550AFN UART, you may need

to turn on the 16550s data buffers and/or replace the Windows serial driver,

COMM.DRV.

4 Try entering the &V (View Parameters) command, making a screen print of the

diagnostics listing, and checking for parameters that may be unacceptable.

Garbage Characters on the Monitor

4 Your computer and the remote computer may be set to different word lengths,

stop bits, or parities. If you have connected at 8-N-1, try changing to 7-E-1, or

vice-versa, using your communications software.

4 You may be experiencing line noise. Enable error correction, if it is disabled, or

hang up and call again; you may get a better connection.

4 At speeds above 2400 bps, the remote modem might not use the same

transmission or error correction standards as your modem. Try connecting at a

slower speed or disabling error correction. (With no error correction, however,

line noise can cause garbage characters.)

4 Try entering the &V (View Parameters) command, making a screen print of the

diagnostics listing, and checking for parameters that may be unacceptable.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

Žádné komentáře

Multi-tech-systems MT5600ZDX Uživatelský manuál Strana 24