Multi-tech-systems MT5600ZDX Uživatelský manuál stáhnout pdf (Strana 50)

Model MT5600ZDX

S29 1 minute 0255 70ms Sets the length of time, in units of

10 ms, that the modem will go

on-hook when it encounters a

flash (!) dial modifier in the dial

string. The time can be limited as

it is a country dependent param-

eter.

S30 1 minute 0255 0 S30 specifies the length of time

(in tens of seconds) that the

modem waits before discon-

necting when no data is sent or

received. This function is only

applicable to buffermode.

S31 Bit-Mapped Options Status (Indicates the status of command

Options.) Default: 194

Bit 0 Single Line Connect Message Enable/Disable (\Vn)

0 =Messages controlled by S95, Wn and Vn (\V0)-

-Default

1 =Single Line Connect Message (\V1)

Bit 1 Auto Line Speed Detection (Nn)

0 = Disabled (N0)

0 = Enabled (N1)--Default

Bit 2-3 Error Correction Progress Messages (Wn)

0 = DTE speed only (W0)--Default

1 = Full Reporting (W1)

2 = DCE speed only (W2)

Bit 4-5 Caller ID (#CID)

0 = Caller ID Disabled (#CID = 0)--Default

1 = Short Formatted Caller ID Enabled (#CID = 1)

2 = Long unformatted Caller ID Enabled (#CID = 2)

Bit 6-7 Reserved

S32 decimal 0255 17 Sets the value of the XON charac-

ter.

S33 decimal 0255 19 Sets the value of the XOFF charac-

ter.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 83 84

Žádné komentáře

Multi-tech-systems MT5600ZDX Uživatelský manuál Strana 50