Multi-tech-systems ISIHP-2U Uživatelský manuál stáhnout pdf (Strana 122)

122 MultiModemISI Hybrid Series, ISIHP-2S/2U/4S/4U/4SD

Terminal Adapter AT Commands & S-Registers

&Wn Store Active Profile

Values: n = 0 or 1

Default: &W1 (Use factory default profile)

Stores your active profile, or configuration, in memory, so you dont lose

your custom settings when you turn off the TA or reset it.

&W0 Stores all current AT command and S-

memory (NVRAM) and configures the TA

so it reads your custom settings in NVRAM

when the modem is turned on or when it is

reset with the Z command. (The &F reset

command continues to read the factory

default settings in ROM.)

&W1 Erases your custom settings in NVRAM the

next time the TA is turned off or reset,

causing the TA to read the factory default

settings in ROM whenever it is turned on or

reset.

&Zn=x Store Telephone Number

Values: n = 09; x = dial string

Default: n/a

Allows you to store a telephone number in a memory register for faster

dialing. To store a number, type &Z, the register number (09) where you

want to store the number, the = character, and the dialing string you want

stored. Then press ENTER. The dialing string can have up to 80 characters.

To read a stored number, type AT&Zn? (e.g., AT&Z4?) where n is the

number of the register you want to read. To display a list of all numbers

stored in memory, type ATL and press RETURN:

0 14082345678

1 16125551212

2 14089876543

4 6313551

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 154 155

Žádné komentáře

Multi-tech-systems ISIHP-2U Uživatelský manuál Strana 122