Multi-tech-systems MTS2SA-T Uživatelský manuál Strana 66
- Strana / 181
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Chapter 7 – Telnet Dialout
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 66
Optional Configuration Commands
(Return to Scenario 1 - Setup Manual Dialout Notes:)
(Return to Scenario 2 - Auto Dialout Prerequisites
)
(Return to Scenario 3 - Auto Dial-out in RAW-Mode Notes:
)
The following commands can be used for optional configurations:
• Enable/Disable the Authentication for Dial-out session
# set login auto-dialout-login <enable/disable>
• Enable/Disable the Switching-between-Dialout & Command Prompt feature
# set ip telnet escape-monitor <enable/disable>
• Set the Escape-Monitor-String to switch between Dialout and Command Prompt sessions.
# set ip telnet escape-string "+++inet"
• Enable/Disable the RAW mode globally for all Dial-out sessions.
# set ip telnet raw-mode <enable/disable>
• Enable/Disable the RAW mode for the serial port S0.
# set serial s0 raw-dialout <enable/disable>
• Set the Baud rate for the serial port S0 to be taken for a Dialout session.
# set serial s0 baud-rate <Baud-rate>
• Set the Flow control for the serial port S0 to be taken for a Dialout session.
# set serial s0 flow-control <rts-cts/none>
• Set the Parity for the serial port S0 to be taken for a Dialout session.
# set serial s0 parity <even/odd/none>
• Set the Data bits for the serial port S0 to be taken for a Dialout session.
# set serial s0 data-bits <7/8>
• Set the Stop bits for the serial port S0 to be taken for a Dialout session.
# set serial s0 stop-bits <1/1.5/2>
• Set the Flow control for the serial port S1 to be taken for a PPP session
# set serial s1 flow-control <rts-cts/none>
• Set the Parity for the serial port S1 to be taken for a PPP session
# set serial s1 parity <even/odd/none>
• Set the Data bits for the serial port S1 to be taken for a PPP session
# set serial s1 data-bits <7/8>
• Set the Stop bits for the serial port S1 to be taken for a PPP session
# set serial s1 stop-bits <1/1.5/2>
- MultiConnect Adapter 1
- Table of Contents 3
- 5
- Specifications 6
- Types of Adapters Available 7
- Package Contents 7
- Handling Precautions 7
- LED Indicators 10
- Chapter 2 – Installation 11
- Connecting the Cables 12
- Connecting the Power 13
- Chapter 3 – Managing and 14
- Configuring the MultiConnect 14
- Adapter 14
- General Notes 15
- General Setup Commands 16
- IP Setup Commands 23
- Serial Setup Commands 27
- Buffer-datasize 33
- Buffer-time (secs) 33
- Descriptions 33
- PPP Setup Commands 42
- HTTP Server Commands 47
- SMTP Client Commands 49
- POP3 Client Commands 52
- FTP Client Commands 55
- SNTP Client Commands 57
- Region Codes Using the CLI 61
- Chapter 6 – Prerequisite 62
- Configurations 62
- IP Mode 63
- Chapter 7 – Telnet Dialout 65
- Scenario 1 – Manual Dialout 67
- Scenario 2 – Auto Dialout 69
- Introduction 73
- Chapter 10 – Modem Mode AT 85
- Command Types 86
- Command Detail 88
- +MS Modulation Selection 107
- Reports the Mode 108
- FastConnect Commands 114
- +PCW Call Waiting Enable 115
- +PMH Modem-on-Hold Enable 115
- +PMHR Initiate Modem-on-Hold 115
- +PMHT Modem-on-Hold Timer 116
- +PIG PCM Upstream Ignore 116
- +PSS Use Short Sequence 117
- S-Registers 118
- Result Codes 127
- Adding Users and Passwords 132
- Setting Passwords 133
- Deleting Users 133
- IPCP Mode 134
- Show Commands 134
- Connect Type 135
- Chapter 12 – HTTP Server 136
- Setup and Configuration 137
- The Parameter List 138
- Example: 139
- The Embedded HTML Page 140
- CGI Scripts 140
- Technical Information 142
- Chapter 13 – SMTP Client 143
- Command Prompt 145
- Interactive Mode 146
- Notes: 147
- Configuration 148
- Chapter 14 – POP3 Client 153
- Error Messages 158
- Email Using Interactive Mode 159
- FTP Client Features 160
- Prerequisites 161
- Note About Read and Store 167
- Features 168
- Server 170
- Appendix A – Flash Upgrade 171
- Appendix B – Regulatory 173
- Information 173
- U.S.A. and Canada) 174
- Replacement Parts 175
Související produkty a manuály pro Hardware Multi-tech-systems MTS2SA-T
(195 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce