Multi-tech-systems MT5634ZPW-PCI Uživatelský manuál Strana 42

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 94
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 41
MT5634ZPW-PCI
42
Owners Manual
Command: X
n
Result Code Selection
Values:
n
= 0–7
Default: 4
Description: X0 Basic result codes (
e.g., CONNECT
); does not look
for dial tone or busy signal.
X1 Extended result codes (
CONNECT 56000 V42bis,
CONNECT 33600 V42bis
, etc.); does not look for dial
tone or busy signal.
X2 Extended result codes with
NO DIALTONE
; does not
look for busy signal.
X3 Extended result codes with
BUSY
; does not look for
dial tone.
X4 Extended result codes with
NO DIALTONE
and
BUSY
.
X5 Extended result codes with
NO DIALTONE
and
BUSY
.
X6 Extended result codes with
NO DIALTONE
and
BUSY
.
X7 Basic result codes with
NO DIALTONE
and
BUSY
.
Command: Y
n
Long Space Disconnect
Values:
n
= 0
Default: 0
Description: Y0 Disable sending or responding to long space break
signal on disconnect.
Y1 Enable sending or responding to long space break
signal on disconnect. (Not supported.)
Command: Z
n
Modem Reset
Values:
n
= 0 or 1
Default: None
Description: Z0 Reset modem to profile saved by the last
&W
command.
Z1 Same as Z0.
Command: &B
n
V.32 Auto Retrain
Values:
n
= 1
Default: 1
Description: &B0 Disable V.32 auto retrain. (Not supported.)
&B1 Enable V.32 auto retrain.
Zobrazit stránku 41
1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 93 94

Komentáře k této Příručce

Žádné komentáře