Multi-tech-systems MT5634ZPW-PCI Uživatelský manuál stáhnout pdf (Strana 45)

MT5634ZPW-PCI

3 AT Commands, S-Registers and Result Codes

Command: &W

Store Current Configuration

Values:

= 0

Default: None

Description: &W0 Store active modem settings in NVRAM; load them at

power-on or following the ATZ command instead of

loading the factory defaults from ROM.

Command: &Y

Select Stored Configuration for Hard Reset

Values:

= 0

Default: 0

Description: &Y0 Select stored configuration 0 on power-up. (For

backward compatibility with some software.)

&Y1 Not supported—responds ERROR.

Command: &Z

Store Telephone Number

Values:

= 0, 1, 2, or 3

x = Dialing string

Default: None

Description: Stores telephone dial string

in memory location

Dial the stored number using the command

ATDS=n

Command: \G

Modem Port Flow Control

Values:

= 0

Default: 0

Description: \G0 Returns an

for backward compatibility with some

software.

\G1 Not supported—responds ERROR.

Command: \J

Data Buffer Control

Values:

= 0

Default: 0

Description: \J0 Enable data buffer—serial port speed is independent

of connect speed.

\J1 Not supported—responds ERROR.

Command: \K

Set Break Control

Values:

= 5

Default: 5

Description: \K5 Modem sends break signal received from the DTE to

the remote modem.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 93 94

Komentáře k této Příručce

Žádné komentáře

Multi-tech-systems MT5634ZPW-PCI Uživatelský manuál Strana 45

Komentáře k této Příručce

Související produkty a manuály pro Hardware Multi-tech-systems MT5634ZPW-PCI